Voltage Indicator type SPA

[Home] [Back] [Technical Description] [Contact]
Voltage Indicator type SPA
Application
The voltage indicator type SPA can be used in high voltage networks with a rated voltage of 5 - 35 KV. The voltage indicator monitores the power level in the network. The result of the evaluation can be transmitted to a separate control panel (remote indication) or can be indicated at the instrument itself.
General Description
The voltage indicator is available in two basic versions.
1) voltage detection, voltage indication, remote indication for each of the three cores.
2) voltage detection, voltage indication, remote indication for only one core.

Each instrument consists of a sensor, a reading instrument, and a light mains.The sensors have to be installed with cable straps on unscreened cables.
The reading instrument (surface-mounted (1) or panel mounted (2)) is installed outside the high voltage area and is connected to the sensors via light mains (standard length 1400 mm).
The instrument is supplied with power from the surroundings of the high voltage cable (via two potential plates).
This power charges a capacitor, which discharges periodically via a neon lamp. The light flashes of the lamp are transmitted to the reading instrument via light mains and evaluated by the reading instrument.
The reading instrument needs auxialary voltage for operating (confer Technical Data).

Order-No.: of Voltage Indicator Type SPA

version of
housing
voltage of
network (kV)
1-core-detection
3-core-detection
remote indication
remote indication
without
N/O contact
witout
N/O contact
surface-
mounted
5 - 9
35.03.01
35.05.01
35.04.01
35.06.01
10 - 19
35.03.02
35.05.02
35.04.02
35.06.02
20 - 36
35.03.03
35.05.03
35.04.03
35.06.03
panel-
mounted
5 - 9
35.07.01
35.08.01
35.09.01
35.10.01
10 - 19
35.07.02
35.08.02
35.09.02
35.10.02
20 - 36
35.07.03
35.08.03
35.09.03
35.10.03
Order Data

High Voltage Indicator type SPA


power supply (V): _______
length of light mains: (mm): ____
order-No.: _______

EMG Elektro-Mechanik GmbH - Ringstr. 4 - D-42553 Velbert / Germany
Tel: +49-2053-422890 - Fax: +49-2053-422899 - Email: kus@emg-ger.com