Short Circuit Indicator type EKL-SFA

[Home] [Back] [Technical Description] [Contact]
Application
The short circuit indicator type SFA is particularly suitable for compact-switchgears. It is used in medium voltage radial networks with one input.
The fault is indicated via flags. The indication is reset in the following ways:

a) manually
b) after an adjusted reset time.

The instrument is equipped with a setting for minimum impulse duration. The remote reset can be accomplished as a permanent contact (standard) or as a selfwiping contact (on special request). The contacts are potential-free.

The reading instrument of the short circuit indicator
type SFA is available as a panel-mounted instrument.
The design of the reading instrument is the same for every switchgear. Only the sensors are adapted to the specific type of switchgear.
Short Circuit Indicator type EKL-SFA
General Description
This short circuit indicator needs a lithium battery for power supply. After the short circuit has occured, the indication will
stay active until:
a) it is reset manually.
b) it resets after the adjusted time.
The required reset time can be adjusted on site. There are four reset times available. (By request, 8 times can be programmed.) The short circuit indicator is equipped with a setting for minimum impulse duration. The times 40 / 60 / 80 / 160 ms can be chosen; they are adjustable on site.
Every instrument has specific trip currents which are preadjusted. Standard adjustments: 200 / 400 / 600 / 800 / 1000 A
Each of these trip currents can be adjusted on site via DIP-switches. (Other values for trip current are available for extra charge.) The remote reset can be adjusted either as a permanent contact or as a self-wiping contact.
The closing time of the self-wiping contact can be adviced when ordering.
switchgear
make
switchgear
type
Dimension Order-No.
 Ormazabal
GC
 85 mm ø
 34.50.05
 Ormazabal
GA; GE
 96 x 96 mm
 34.50.06
 AREVA
FBA
 92 mm ø
 34.51.03
 AREVA
FBX
 sensor with cable length 1,0 mtr.
 34.51.04
 ABB
SafeRing
SafePlus
RGC
 sensor with cable length 0,90 mtr.
 34.53.04
 sensor with cable length 1,00 mtr.
 34.53.05
 sensor with cable length 1,1 mtr.
 34.53.06
 Siemens
8DJ / 8DH
 95 mm ø
 34.54.03
 
     
 Schneider
 Electric
RM6
 80 mm ø
 34.55.03
 Eaton - Holec
SVS
 85 mm ø
 34.57.03
 Neutral
assembly on
cable
 sensor cable--ø 20 - 40 mm
 34.11.12
 sensor cable--ø 40 - 65 mm
 34.11.13
Order Data

Short Circuit Indicator type SFA

type of switchgear: _______

Order-No.: _______

EMG Elektro-Mechanik GmbH - Ringstr. 4 - D-42553 Velbert / Germany
Tel: +49-2053-422890 - Fax: +49-2053-422899 - Email: kus@emg-ger.com