Earth Fault and Short Circuit Indicator type EKL 1.2

[Home] [Back] [Technical Description] [Contact]
Application
This earth fault and short circuit indicator is
a combined instrument for detecting earth faults and short circuits.
This indicator is used in medium voltage radial networks with one input. The earth fault current in resistance-earthed or solidly earthed neutral systems must be 10 A as a minimum. This indication system should be installed in each branch of the network.


The indication of short circuits or earth faults is perforned via one LED for each type of fault. The remote indication is performed via a potential-free relay contact.
Earth Fault and Short Circuit Indicator type EKL 1.2
General Description
The indicator is available as a panel mounted (1) or surface mounted (2) device. The indicator set consists of one reading instrument (1,2), four sensors (4), fiber optic cables (3) and a copper cable (5).

The earth fault- and short circuit indicator summarizes two ways of fault search:
1.) detection of short circuits
2.) detection of earth faults

version
number of operating points
earth fault short circuit
E 1 1
F 6 7
The Versions "E" and "F" of the earth fault- and short circuit indicator type EKL1.2 are constructed identically. The difference is the number of operating points for earth fault and / or short circuit indication which can be chosen (confer table).

Every instrument is equipped with a contact for remote indication as a permanent contact (1 x changer). (Wipper contact is availabe by special request.)

Earth Fault and Short Circuit Indicator type EKL1.2

core
diameter
(mm)
surface mounted
panel mounted
earth fault sensor
version
version
one-
core
cable
three-
core
cable
E
F
E
F
5 - 15
22.05.11
22.04.11
22.06.11
22.15.11
12.07.11
12.06.11
15 - 25
22.05.12
22.04.12
22.06.12
22.15.12
12.07.12
12.06.12
25 - 35
22.05.13
22.04.13
22.06.13
22.15.13
12.07.13
12.06.13
35 - 45
22.05.14
22.04.14
22.06.14
22.15.14
12.07.14
12.06.14
45 - 55
22.05.15
22.04.15
22.06.15
22.15.15
12.07.15
12.06.15
55 - 65
22.05.16
22.04.16
22.06.16
22.15.16
12.07.16
12.06.16
Steel
belt*
22.05.18
22.04.18
22.06.18
22.15.18
12.07.18
12.06.18
* advise cable diameter by ordering
Order Data

Earth Fault and Short Circuit Indicator type EKL1.2

operating points short circuit:
200 / 300 / 400 / 500 / 600 / 800 / 1000 A **
reset delay:
(h)______
minimum impulse duration:
(ms)______
power supply :(V)______
length of fiber optic cables
:(mm)_____
 order number
:________

earth fault sensor
operating points earth fault:
10 / 20 / 30 / 40 / 50 / 60 A**
cable diameter
:(mm)_______
cable length
:(mm)_______
order number
:________

**standard - other values can be chosen by special request

EMG Elektro-Mechanik GmbH - Ringstr. 4 - D-42553 Velbert / Germany
Tel: +49-2053-422890 - Fax: +49-2053-422899 - Email: kus@emg-ger.com