Capacitive Voltage Ledge type KSG

[Home] [Back] [Technical Description] [Contact]


Application
This capacitive voltage ledge is an element of the voltage detection system VDS. It is used in medium voltage switchgears.
The capacitive voltage ledge is designed to work in HR-Systems. It serves as a connection port (interface) for the voltage indicator and compares the phases.
 		 Capacitive Voltage Ledge type KSG
General Description
The capacitive voltage ledge type KSG is the port of the voltage detection unit over the panel-mounted voltage indicator. It consists of a panel-mounted housing with test sockets. The dimensions of the housings are (W*H*D) 124*32*23 mm.
The sockets are designed according the VDE-instructions.
In case the voltage indication is not required, the voltage socket is connected to the earth socket via a short circuit plug. The measuring circuit component including the overvoltage arrester is installed in the housing.

The measuring circuit component must be adapted to each type of bushing or insulator.
 

Order Data

Capacitive voltage ledge type KSG


Order-No: 38.08.01-...*
Current output of the coupling electrode:... µA
(in case the capacity of the balancing capacitor is unknown)

* capacity of balancing capacitor in pF

Hint:
Accessories are shown  here

1) capacitive insulator
2) connection leads
3) voltage indicator 
 

EMG Elektro-Mechanik GmbH - Ringstr. 4 - D-42553 Velbert / Germany
Tel: +49-2053-422890 - Fax: +49-2053-422899 - Email: kus@emg-ger.com